ODE Flex Planning Details

Optimum Insulation Thicknesses

Steel Pipe
Diameter
mm
Heating System
90/70°C
Heating System
6/10°C
Warm Line
60°C
Min. Thickness to
prevent condensation
Inch
Insulation thickness (mm)
Efficiency
Insulation thickness (mm)
Insulation thickness (mm)
Insulation thickness (mm)
1/2”
22
15
%75,7
20
10
10
3/4”
28
15
%76,7
20
15
10
1”
35
15
%77,4
20
15
10
1 1/4”
42
15
%77,8
20
15
15
1 1/2”
48
20
%82,9
20
15
15
2”
60
20
%83,4
30
20
15
2 1/2”
76
20
%83,7
30
20
15
3”
89
20
%83,8
30
20
15
4”
114
30
%86,9
30
30
15
5”
139
30
%87,0
30
30
15
6”
165
30
%88,3
30
30
15
Assumptions criteria
Atmosphere temp.    : 5°C
Fluid temp. : 80°C
Atmosphere temp.    : 35°C
Fluid temp. : 6°C
Relative Hum.     : %70
Atmosphere temp.    : 5°C
Fluid temp. : 60°C
Atmosphere temp.     : 35°C
Fluid temp.  : 6°C
Relative Hum.     : %70


Terms of Use
Consumption
  
ODE Konfix
250 - 400 gr/m2
Spread to both surfaces and applied after 10 min.
 
For Pipe :
Pipe length x insulation thickness x 1,3 x consumption
 
For Sheet :
Area to adhere x consumption amount
ODE Tape PVC Grey Tape
Pipe length is multiplied by 1,3
 

ODEFLEX Pipe Application Details

ODEFLEX Pipes are cleanly cut with a knife. It shall be paid attention so that the material does not break during the cutting process.

 

The ODEFLEX cut and opened will be put through on the pipe that the application will be made. ODE Confix is spread on to the joining parts of the pipe.

 

It is firmly adhered with hands.

 

After the adhesion process, joining surfaces are fixed with ODE clips in 20 cm distances. With the ODE Clips the opening of adhesion is prevented before it dries.

 

The joining parts of ODEFLEX pipes are taped with ODE Band and ODE Tape PVC Band so that the insulation is finished.


 

On top of ODEFLEX which ODE Band is applied, 40 cm width ODE Foil is covered and the insulation is finished.