ODE STARFLEX Accessories

It is produced from galvanize.
The base is a product from austere metal and has a part which is self adhesive.
It is 35 - 60 - 100 mm long brace pins.
It can be used with glasswool, stonewool, expanded polystyrene, rigid and flexible polyurethane foam, phenolic foam, cork insulation board and other similar insulation materials.

Increases the speed at which insulation application is realized.
Provides an aesthetic and smooth look at the exterior insulation surface.
Sticks to the desired surface with its self adhesive base and carries the insulation material.
Decreases the labor cost at the assembly field at a significant rate.
OPIM is the best choice with advanced techniques, high quality and efficiency, power and simplicity to use.

The surface that Opim will be applied shall be clean and free from dust and humidity.
The atmosphere temperature and metal surface temperature shall be minimum 5°C.
Insulation board is placed on the pins.
Insulation material is pressed until it adheres to the base.
Self locking scales will be assembled to the pins so that the sides with bulges are on the exterior side.
Scales are pressed until they adhere to the insulation surface.
Finally, pins that are longer than normal shall be cut.

It is used in the impermeability of the aluminium foil coated insulation materials and place of joints of vapor preventing aluminium foils.
There is no change in its specifications in cases of temperature changes.
It is used for the impermeability of the place of joints of the insulation systems that are aluminium foil covered, the HVAC ducts and pipe lines.
Temperature Resistance: -20° C / +120° C

It is used in the impermeability of the aluminium foil coated
insulation materials and place of joints of vapor preventing
aluminium foils.
There is no change in its specifications in cases of
temperature changes.
Temperature Resistance: -10° C / +110° C