1. FLAT ROOFS

Minimum ODE ISIPAN Thicknesses In Flat Roofs, Which Are Necessary For Degree - Day Regions As Per TS 825

* Calculated for 15 cm Reinforced Concrete Floor.

A. Flat Roofs With Access ODE bituminous primer must be applied to the surfaces, to which the ODE MEMBRAN polymer bituminous water insulation blankets will be adhered. ODE MEMBRAN fittings are weather-boarded horizontally and vertically for 100 mm and then adhered by heating. ODE Isıpan DT (Extruded Polystyrene Thermal Insulation Boards, XPS) are laid freely on water insulation. ODE Isıpan DT Board thicknesses should be determined as per TS 825 regulations. Also ODE Santex (polyester felt) should be used as the layer and the protection concrete should be casted.

B. Flat Roofs Without Access ODE bituminous primer must be applied to the surfaces, to which the ODE MEMBRAN polymer bituminous water insulation blankets will be adhered. ODE MEMBRAN fittings are weather-boarded horizontally and vertically for 100 mm and then adhered by heating. ODE Isıpan DT (Extruded Polystyrene Thermal Insulation Boards, XPS) are laid freely on water insulation. ODE Is›pan DT Board thicknesses should be determined as per TS 825 regulations. Also ODE Santex polyester felt) should be used as the layer and granulometric aggregate layer with granular sizes of 32/64 mm should be laid.

C. Garden Flat Roofs ODE bituminous primer must be applied to the surfaces, to which the ODE MEMBRAN polymer bituminous water insulation blankets will be adhered. ODE MEMBRAN fittings are weather-boarded horizontally and vertically for 100 mm and then adhered by heating. ODE Isıpan DT (Extruded Polystyrene Thermal Insulation Boards, XPS) are laid freely on water insulation. ODE Isıpan DT Board thicknesses should be determined as per TS 825 regulations. Also ODE Santex (polyester felt) should be used as the layer and the protection concrete should be casted. Lush soil layer is laid for use in growth of the plants.

Minimum ODE ISIPAN Thicknesses In Garden Flat Roofs, Which Are Necessary For Degree - Day Regions As Per TS 825

* Calculated for 15 cm Reinforced Concrete Floor.

2. INCLINED ROOFS

Minimum ODE ISIPAN Thicknesses In Inclined-Head Roofs, Which Are Necessary For Degree - Day Regions As Per TS 825

* Calculated for between, over and under the rafter.

3. GROUND EXPOSED WALLS AND FLOORINGS

A. Floorings That Settle On Soil ODE bituminous primer must be applied to the surfaces, to which the ODE MEMBRAN polymer bituminous water insulation blankets will be adhered. ODE MEMBRAN fittings are weather-boarded horizontally and vertically for 100 mm and then adhered by heating. ODE Isıpan DT (Extruded Polystyrene Thermal Insulation Boards, XPS) are laid freely on water insulation. ODE Isıpan DT Board thicknesses should be determined as per TS 825 regulations. In soil-contact walls, ODE Isıpan DT is fixed temporarily until fitted with a bituminous adhesive. An aggregate layer is formed and fitted for drainage purposes.

B. Basement Floors That Settle On Impermeable Soil ODE bituminous primer must be applied to the surfaces, to which the ODE MEMBRAN polymer bituminous water insulation blankets will be adhered. ODE MEMBRAN fittings are weather-boarded horizontally and vertically for 100 mm and then adhered by heating. ODE Isıpan DT (Extruded Polystyrene Thermal Insulation Boards, XPS) are laid freely on water insulation. ODE Isıpan DT Board thicknesses should be determined as per TS 825 regulations. In soil-contact walls, ODE Isıpan DT is fixed temporarily until fitted with a bituminous adhesive. An aggregate layer is formed and fitted for drainage purposes.

Minimum ODE ISIPAN Thicknesses In Soil-Contact Walls and Floorings, Which Are Necessary For Degree - Day Regions As Per TS 825

* Calculated for 15 cm Reinforced Concrete Floor.